To Next PageTo Next PageWhy is my Panasonic NA-F70S7 not supplying water?
If your Panasonic Washer is not supplying water, ensure that the water faucet is turned on and check for a water outage. Also, the water supply filter might be clogged with dirt.
Why does my Panasonic Washer start with rinse when I select only spin?
If your Panasonic Washer starts with a rinse when you only want a spin, the tub rotation speed is being adjusted to reduce foaming during the spin cycle.
What to do if my Panasonic NA-F70S7 Washer changes to rinse in the middle of spin?
If your Panasonic Washer's operation suddenly changes from Rinse/Spin to the rinse process mid-spin, it's likely because the clothes are concentrated on one side of the tub. The machine automatically corrects this unevenness by initiating a rinse process. To prevent this, try to place clothes as evenly as possible.
Why is the water level too high in my Panasonic NA-F70S7 Washer?
If the water level in your Panasonic Washer is too high for the amount of laundry, it may be because the laundry was already wet or there was water in the tub before starting the operation.
Why is the water level too low in my Panasonic NA-F70S7?
If the water level in your Panasonic Washer is too low for the amount of laundry, it may be because you are washing light clothes (of synthetic fibre, etc.).
Why does my Panasonic NA-F70S7 start with rinse but no water is supplied?
If your Panasonic Washer starts operation with rinse, but water is not supplied, water is supplied after spin if there is no water in the tub. If there is water in the tub, water is supplied after water discharge.
Why is there irregular rotation during spin in my Panasonic NA-F70S7 Washer?
If you're experiencing irregular rotation during the spin cycle of your Panasonic Washer, it's because the tub rotation speed is automatically adjusted to reduce foaming.
What to do if my Panasonic NA-F70S7 main unit is not operating?
If your Panasonic Washer's main unit isn't operating, several factors could be at play. First, ensure the lid is completely closed. Check if a power failure has occurred, or if the power fuse has blown or the breaker tripped; make sure the power plug is fully inserted. Also, verify that the water faucet is turned on and that you've pressed the “Start” button. Finally, check if the timer is preset.
Why does the time indication increase or not change on my Panasonic NA-F70S7?
If your Panasonic Washer's time indication increases or does not change, note that the time indication is approximate. The remaining time is corrected during operation and displayed.
Why does my Panasonic NA-F70S7 Washer switch to rinse during spin?
If your Panasonic Washer starts rinsing in the middle of a spin cycle, it's likely because the clothes are concentrated on one side of the tub. The machine automatically corrects this unevenness by initiating a rinse process.
General| Style | Top-Loading |
|---|---|
| Color | Light Grey |
| Washer Capacity | 7 kg |
| Dryer Capactity | - |
| Max Spin Speed | - |
| Spin Speeds | - |
| Spin Class | - |
| Number of Cycles | 10 |
| Cycle Selections | Delicates |
| Wash | Bedding |
| Options | Delay Wash |
| No spin and No heat | ColdWash |
| Hours | Stay Fresh Door Seal |
| Noise level | - |
| Temperature Selections | - |
| Cold) | Cold |
| Energy Class | - |
| Annual Energy Consumption | - |
| Annual Water Consumption | - |
| Water Consumption Per Cycle | - |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Current | - |
Weight and Dimensions| Depth | 571 mm |
|---|---|
| Height | 929 mm |
| Width | 562 mm |
| Net Weight | 28 kg |
Covers precautions related to power cords, plugs, humid environments, and fire hazards.
Includes warnings about children's use, self-repair, tub contact, and grounding.
Details risks associated with hydrogen gas from water heaters and precautions.
Explains temperature setting, water level, remaining time display, and indicator lamps.
Covers Reserve, process settings, water level changes, and power on/off.
Lists basic programs like Normal, Favorite, Quick, Jeans, Soak.
Details Gentle Hand Wash, Delicate, Bed Sheets, Air Dry, and Tub Hygiene programs.
Covers programs designed for specific stain types like Sweat, Sauces, and Curry.
Instructions for using the detergent and softener dispenser drawer.
Proper method and precautions for adding fabric softener.
Recommendations for using bleach, including restrictions.
How to use the separate inlet for liquid detergent or bleach.
Steps before washing, including checking installation and turning the machine on.
How to select wash programs and adjust water temperature.
Steps for adding detergent, water level, and starting the cycle.
How to set the machine to finish washing at a later time.
Specific instructions and capacity for the Stain Master program.
How to save and use preferred wash settings.
Guidelines for washing delicate items using specific programs.
How to wash bed sheets, including preparation and capacity.
How to turn off or reset the end-of-cycle buzzer.
Instructions for activating and deactivating the child safety lock.
Procedure for turning the tub manually for maintenance access.
Steps for removing and cleaning the lint filter after each operation.
How to clean the detergent and softener drawer when stained.
Methods for cleaning the exterior of the washing machine.
Steps to clean the water supply filter if water flow is slow.
How to run the Tub Hygiene program for cleaning the tub.
Choosing a suitable location and attaching the bottom cover.
Connecting the drain hose correctly to prevent water leakage.
Installing the water tap adaptor and connecting supply hoses.
Connecting power, grounding, and ensuring the machine is stable.
Performing a test run to confirm proper installation and function.
Explains error codes (U11-U99, H) and provides troubleshooting steps.
Describes the meaning of the hot water indicator lamp.
Addresses issues with time indication, operation duration, and starting.
Solutions for no water supply, water during wash, and incorrect water levels.
Troubleshooting unexpected changes in rinse/spin processes or irregular spinning.
Resolving problems related to power interruptions, stain removal, and detergent.
Details on voltage, power consumption, water, and capacity.
Machine dimensions, weight, and required water pressure.
Guidelines for environmentally responsible disposal of the appliance.
