How to fix unevenness during the spin process of my Panasonic Washer?
If your Panasonic Washer is experiencing unevenness during the spin process, try adding one or two bath towels to balance the load. If the issue persists, stop the washer and allow it to rotate several times during the Rinse/Spin cycle.
Why does the amount of foam vary after washing in my Panasonic Washer?
If the amount of foam varies after washing in your Panasonic Washer, it could be due to several reasons. Check if you're using the correct amount of powder detergent. Too little detergent, especially with heavily soiled loads, or using a low foam detergent can affect the foam level. Also, ensure you are not overloading the washer, as this can also impact the amount of foam produced.
How to troubleshoot a Panasonic Washer with no reaction during operation?
If your Panasonic Washer is not reacting during operation, try the following: Ensure the Child Lock is off (refer to page 30). Check for any power cuts or timer settings that might be interfering. Make sure the door is closed properly and the unit is turned on. If none of these work, unplug the washer, wait 30 seconds, then plug it back in and press “Start”. If the issue continues, check the breaker.
Covers risks of serious injury, death, fire, and electric shock.
Steps for preparing laundry and selecting wash programs.
Overview of wash programs, settings, and optional functions.
Steps for cleaning filters, seals, and drawers for appliance upkeep.
Troubleshooting steps for common error codes displayed by the machine.
Guidelines for location, installation, and connecting water supply and drain hoses.
Overview of app features, setup, and troubleshooting for smart connectivity.
General| Type | Front Load Washer |
|---|---|
| Capacity | 10 kg |
| Spin Speed | 1400 RPM |
| Washing Capacity | 10 kg |
| Drying Capacity | 6 kg |
| Noise Level (Washing) | 53 dB |
| Noise Level (Spinning) | 72 dB |
| Color | White |
To Next Page