To Next PageTo Next PageHow to fix unevenness during the spin process of my Panasonic NA-V95FR1 Washer?
If your Panasonic Washer is experiencing unevenness during the spin process, try adding one or two bath towels to balance the load. If the issue persists, stop the washer and allow it to rotate several times during the Rinse/Spin cycle.
Why does the amount of foam vary after washing in my Panasonic Washer?
If the amount of foam varies after washing in your Panasonic Washer, it could be due to several reasons. Check if you're using the correct amount of powder detergent. Too little detergent, especially with heavily soiled loads, or using a low foam detergent can affect the foam level. Also, ensure you are not overloading the washer, as this can also impact the amount of foam produced.
How to troubleshoot a Panasonic NA-V95FR1 Washer with no reaction during operation?
If your Panasonic Washer is not reacting during operation, try the following: Ensure the Child Lock is off (refer to page 30). Check for any power cuts or timer settings that might be interfering. Make sure the door is closed properly and the unit is turned on. If none of these work, unplug the washer, wait 30 seconds, then plug it back in and press “Start”. If the issue continues, check the breaker.
General| Capacity | 9.5 kg |
|---|---|
| Spin Speed | 1400 rpm |
| Color | White |
| Washing Capacity | 9.5 kg |
| Type | Front Load |
Step-by-step guide for the standard washing process.
Procedure for removing and cleaning the water supply filter.
Monthly procedure for draining the drum and cleaning the drain filter.
How to perform the Tub Clean program to clean the drum.
Steps to resolve the appliance not starting or operating.
Steps to take if the washing machine door cannot be opened.
Solutions for when the washing machine cannot drain water.
Diagnosis and solutions for the U17 error code indicating spin failure.
Resolving issues when the machine fails to spin or dry.
Steps to take when the appliance cannot supply water.
Guidelines for selecting a suitable and safe installation spot.
Visual guide for checking the installation environment and clearance.
Step-by-step guide to remove shipping anchor bolts before use.
Steps to perform a test run after installation to check for issues.
How to adjust the feet to ensure the appliance is level and stable.
Proper procedure for connecting the water supply hose to prevent leaks.
Instructions for connecting the drain hose to sinks, stand pipes, or drain holes.
How to use the app to operate the washing machine remotely.
Lists the necessary equipment like smartphones and routers for app use.
Ensures a suitable internet connection and router settings for app functionality.
Guide on downloading and installing the Panasonic SmartApp+.
Steps to register the washing machine with the app after installation.
Lists electrical, dimensional, and performance specifications of the washing machine.
