Panasonic NI-33GX - Page 9

FABRIC IRONING CHART
NOTES:1. Check garment for specific ironing instructions. Always follow
manufacturer's instructions.
2. Iron blended fabrics at setting for lower-temperature fiber or for the
highest-percentage fiber.
3. Use caution, some synthetics may melt at high temperature.
Temperature ‘ A
Selector Setting O Fable Ironing Recommendations
ACRYLIC l
* ACRILAN Dry iron on wrong side, or use a press cloth on
* CRESLAN top of fabric. Don't sprinkle water directly on
* ORLON fabric to avoid spots.
ACETATE To iron suede, cover ironing board with brown
METALLICS paper and use it as a press cloth.
SUEDE
NYLON
* ANTORON
* CAPROLAN
SILK
PERM. PRESS
RAYONS
POLYESTER
Dry iron on wrong side.
* DACRON Dry iron on wrong side. To touch-up collars,
* FORTREL cuffs, pockets, etc., iron lightly on right side.
* KODEL
TRIACETATE
* ARNEL
W'n W COTTON
Steam ironing is suggested. Never iron
completely dry. To iron velvet, steam iron
holding the iron slightly above the fabric.
Steam ironing is suggested. Sprinkle water on
the fabric, depending on its thickness. Iron dark
fabrics on wrong side to avoid unwanted sheen.
Steam ironing is suggested. Iron dark fabrics on
wrong side to avoid unwanted sheen.
* Trademarks of Fiber Manufacturers.