Panasonic NN-8508 - Page 20

NN-8508, NN-8558
NN-8808, NN-8858
NN-8808P
7. Replacement of the lower heater (Heater A)
(A) Remove the tray and the turntable from oven cavity.
(B) Carefully turn the oven up side down.
(C) Remove the base C by removing 2 screws. (Fig. 28)
(D) Disconnect the turntable motor connector.
(E) Remove 2 screws holding 2 heater terminalis. (Fig. 29)
(F) Remove the motor bracket by removing 3 screws. (Fig. 30)
(G)
Remove
the
lower
heater
panel
by
removing
5
screws.
(Fig.
34)
(H) Remove the adiabatic material A.
(I) Remove the lower heater (heater A) by freeing the 4 hooks and re-
moving 2 screws. (Fig. 35)
Fig. 28
TURNTABLE
MOTOR
MOTOR
BRACKET
HEATER TERMINALS
Fig. 29
LOWER HEATER PANEL
HEATER
TERMINALS
LOWER HEATER
(HEATER A)
Fig. 31 Fig. 30