Panasonic NN-K354WM - Using the Timer

18
19
EN
Using the timer
Example: To count 5 minutes.
By using the Timer, you can program Stand Time after cooking is completed or use to program
the oven as a minute timer. Example: To stand for 5 minutes after cooking at 3 minutes at Medium
microwave power.
By using the Timer, you are able to program Delay Start cooking. Example: To start cooking 5 minutes
later at 3 mins. Medium microwave power.
Press 5 times. Set desired amount
of time. (up to 99 min 50 secs)
Press Start. Time will
count down without
the oven operating.
Press Once.
Press 3 times.
Set the desired
cooking program.
(See page 14 for
instructions)
Press once.
Press Start.
Cooking starts.
After cooking,
standing time
will count down
without the
oven operating.
Press Start.
Delayed time
will count
down, then
start cooking.
Press 5 times. Set
the desired amount
of standing time.
(up to 99 min 50 sec)
Press 3 times.
Set the desired
cooking time.
Press 3 times.
Set the desired
cooking time.
Press 5 times. Set
the desired amount
of delay time. (up to
99 min 50 sec)
Press Once.
Press 3 times.
Set the desired
cooking program.
(See page 14 for
instructions)
Delay start cooking
Stand time
Kitchen Timer
5 times
3 times
5 times
5 times
3 times
 Notes
1. Multi-stage cooking can be programmed including Delay Start and Stand Time.
2. If the oven door is opened during the Delay Start, Stand Time or Minute Timer, the
time in the display window will continue to count down.
3. Stand time/ Delay start cannot be programmed before/ after an auto program.
4. If the programmed delay time exceeds one hour, the time will count down in units of
minutes. If less than one hour, the time will count down in units of seconds.