G. ASSEMBLING DOOR
(1) When mounting the door assembly to the oven
assembly, be sure to adjust the door assembly
parallel to the chassis. Also adjust so the door has no
play between the inner door surface and oven frame
assembly. If the door assembly is not mounted
properly, microwaves may leak from the clearance
between the door and the oven.
H. REMOVING THE VENTILATION FAN ASS'Y
(1) Remove the mounting plate by removing two
screws securing it to the back plate.
(See Figure 16)
(2) Remove the two screws securing the MOUNT and
one screw securing the ventilation fan ASS'Y.
(See Figure 17)
(3) Carefully pull the ventilation motor ASS'Y out of
the microwave oven. (See Figure 18)
7-10
To Next Page
Loading...
