12
Control Panel
Beep Sound:
When a pad is pressed correctly, a beep will be heard.
If a pad is pressed and no beep is heard, the unit did not or cannot accept the instruction.
When operating, the oven will beep twice between programmed stages. At the end of any
complete program, the oven will beep 5 times.
NOTE:
If an operation is set and Start Pad is not pressed, after 6 minutes, the oven will auto-
matically cancel the operation. The display will revert back to clock or colon mode.
Display Window
Popcorn Pad
(☛ page 15)
Power Level Pad
(☛ page 14)
Inverter Turbo Defrost
Pad (☛ page 16)
Timer Pad
(☛ page 21)
Clock Pad
(☛ page 13)
Stop/Reset Pad
Number Pads
Auto Reheat Pad
(☛ page 18)
Keep Warm Pad
(☛ page 14)
Quick Min Pad
(☛ page 14)
Serving/Weight Pad
(☛ page 18)
Auto Cook Pad
(☛ page 18)
More/Less Pads
(☛ page 15)
Start Pad
Before cooking: One tap
clears memory.
During cooking: One tap
temporarily stops the cooking
process. Another tap cancels
all your instructions and time
of day or colon appears in the
Display Window.
One tap allows oven to
begin functioning. If door
is opened or Stop/Reset
Pad is pressed once dur-
ing oven operation, Start
Pad must be pressed
again to restart oven.
NN-S615*
* The control panel of
NN-SA616/SA636/
SA620/SA630 has the
same key layout as
NN-S615.
To Next Page
Loading...
