Step 5: Connect Joint Water Supply to water supply tab as instructed in Figure 3.
Disassemble C & D
of Joint Water Supply
Connect C with Rubber ring
into water supply tab
Insert D into Tube A in Step 4
as shown in above image
Insert Tube A into C until Tube A
reach to end point of C.
Move up D and screw it to rmly x Tube A
and C.
Figure 3: Connect Joint Water Supply to water supply tab
C
D
Rubber ring
C
D
Tube A
End point of C
C
D
Tube A
14
To Next Page
Loading...
