Step 9: Determine the mounting position for the Water Filter and x the
Sub Bracket Filter 6 with 02 pcs of Truss M4x35 7 to a xed surface.
The direction to x Sub Bracket Filter is referred to in Figure 5.
Ensure the Water Filter is in a convenient location to access easily every 6 months
for replacement.
Ensure the clearance from the bottom of Water Filter is at least 50 mm to perform
lter removal (Figure 6).
Insert Water Filter to Sub Bracket Filter by inserting the Head Filter of Water Filter
to hooks of Bracket until get the “Click” sound when Water Filter and Sub Bracket
Filter are locked into place.
Move Water Filter down about 90° until get the “Click” sound when Water Filter is
rmly locked into.
We recommend tting the Water Filter in a vertical orientation with the Head Filter
at the top as in Figure 6.
This will ensure the performance of Water Filter and minimise water leakage
during replacement of the lter.
Figure 5: Sub Bracket Filter and Water
Filter xing direction.
Figure 6: Water Filter usage setting.
Head Filter
Sub Bracket Filter
2 x Truss M4x35
Fixed Surface
Fixed Surface
At least 50 mm
Water Filter
16
To Next Page
Loading...
