Panasonic NV-FJ615 Series - Connecting and Preparations for TV without Q Link Function

10
Connecting and Preparations for a TV Not Equipped with
the Q Link Function
Aerial (not supplied)
Aerial lead
(not supplied)
TV (not supplied)
Aerial Input
socket
To AC Mains
socket
RF Coaxial cable (supplied)
≥Must be connected to
watch TV channels.
AC Mains lead (supplied)
or Method 2.
If you are connecting your VCR to a TV using only RF coaxial cable, then follow the
steps below. (RF Connection)
After completing the above connections, proceed to the Auto Setup page (Page 12).
Aerial (not supplied)
i
f
Aerial lead
(not supplied)
TV (not supplied)
AC Input
socket
e
j
Aerial Input
socket
21-pin Scart
socket
To AC
Mains
socket
RF Coaxial cable (supplied)
≥Must be connected to
watch TV channels even if
21-pin Scart cable is used
to connect VCR to TV.
AC Mains lead
(supplied)
21- Scart cable to AV1
(not supplied)
Method 1.
If you are connecting your VCR to a TV using RF coaxial cable and 21-pin Scart cable, then
follow the steps below. (AV Connection)
After completing the above connections, proceed to the Auto Setup page (Page 11).
i
AC Input
socket
e
j