Playback mode
46
VQT0T47
Protecting files on a card
Files recorded on a card can be locked so that
they may not be deleted by mistake. (Even if the
files are locked, they will be deleted if the card is
formatted.)
≥Set to Card Playback Mode.
1 Set [BASIC] >> [PROTECT] >> [YES].
2 Move the joystick to select a file to be
locked, and then press it.
≥Indication of [ ] 1 appears and the
selected file is locked. Press the joystick
again, and the protection will be cancelled.
≥2 or more files can be locked in succession.
ª
To complete the settings
Press the [MENU] button.
Writing the printing data on a card
(DPOF setting)
You can write the data of pictures to be printed,
number of prints, and other information (DPOF
data) onto the card.
≥Set to Card Playback Mode.
1 Set [ADVANCED] >> [DPOF SET] >> [SET].
2 Move the joystick to select a file to be set,
and then press it.
≥The number of prints 1 set to be in DPOF is
displayed.
3 Move the joystick up or down in order to
select the number of prints, and then press
it.
≥You can select from 0 to 999. (Selected
number of pictures can be printed as you set
the number of prints with the printer
supporting DPOF.)
≥2 or more files can be set in succession.
ª
To complete the settings
Press the [MENU] button.
≥DPOF setting made on another camera may not
be recognised by this camera. Please perform
the DPOF settings on your movie camera.
ª
To set so that all pictures are not
printed
Select [CANCEL ALL] in Step 1.
ª
What is DPOF?
DPOF stands for Digital Print Order Format. This
enables the printing information to be added to
the pictures on the card so that it can be used on
a system supporting DPOF.
1
1
VQT0T47_ENG.book 46 ページ ２００５年１２月２７日 火曜日 午前１１時５７分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
