Panasonic Omnivision PV-8200 - Page 17

O Record On a Tape
Y bd 1 Inserta cassette with record tab.
Check list before you begin. * VCR power comes on automatically.
O All connections are made.
(See pages 6~9.)
L VCR is plugged in.
TV i d VCR
A
e
e
2
Press
CH
A/V
or
NUMBERED
keys to select a channel.
* Or, press CHANNEL A/F on the VCR.
* Holding down CH A/F will increase
the channe! search speed.
+ To record from an outside source,
press CH A/F or INPUT to select
“LINE” (see page 23).
3 Press SPEED to change the
Multi Function VCR/TV recording speed.
CHANNEL
Pisplay
+
SP
=
Standard
Play
,
Up/Down : LP = Long Play
SLP = Super Long Play
(See page 5.)
INPUT 4 Press REC/TIME on the remote control or VCR to
start recording,
+ To edit out unwanted portions, press PAUSE to pause the
recording in progress.
To release, press PAUSE again.
5 (After the VCR-has been in Pause. mode for 5 pines it will
stop automatically to protect the tape and video head.)
0
D
v,
o
O
ze]
t
1
MANTE
One Touch Timer Recording (OTR)
4 The VCR starts recording and tums itself off at a preset time.
in step 4, press REC/TIME repeatedly to set the length of the
recording. Each press will change the stop time as shown.
i Rec —>0:30— 1:00
Ponen
* “TIMER” lights in the Multi Function Display.
2 ¢ The remaining recording time can be displayed by pressing
DISPLAY in OTR mode.
CHANNEL
Up/Down
5 Press STOP to stop recording,
e Or, press STOP/EJECT on the VCR.
Record One Program While Watching Selecting Channels at the VCR
Another
1 Tum your TV and VCR on.
1 Press VCR/TV while recording is in progress to turn * VCR Indicator lights on the Multi Function Display.
off the VCR indicator in the Multi Function Display. If indicator doesn't light, press VCR/TV to tum it on.
2 Use the TV channe! controls to select a program. 2 Use CH A/F on the remote control or VCR to
The VCR will continue to record your program while select channels.
you watch any channel you choose. * To switch back to TV channel selection, press
* To switch back and forth between the recording and VCR/TV to tum VCR indicator off, or simply turn
viewing channel, press VCR/TV. the VCR power off.
17