Panasonic Omnivision PV-9400

Quick Use Guide
Playback a Tape
1 Make all connections (page 4).
TV
IN|FROM
ANTENNA MEE UnE
br; oh "|
eee |
2 Set VCR Channei on VCR Rear Panel.
Slide the VCR
R-AUDIO“L 6 a ° seo) Channel selector
~26) switch to the channel
“e 6 . 104 26) number not used by
Back of Model
local broadcast
PV-9450 VCR only
Tune your TV to the channel selected above (3 or 4)
whenever you want to see the picture from the VCR
on your TV screen.
3 Play your Tape.
Insert a tape
Press PLAY
(Start playback)
Panasonic Consumer Electronics
Company, Divislon of Matsushita
Electric Corporation of America
One Panasonic Way Secaucus,
New Jersey 07094
companies (CH3 or 4).
IN FROM
ANTENNA| VHF/ "eo |
ob ro
Slide the VCR
Channel setector
switch to the channel
number not used by
local broadcast
Back
of
Model
companies
(CH
or
4).
PV-9450 VCR only
Tune your TV to the channel selected above (3 or 4)
whenever you want to see the picture from the VCR
on your TV screen.
3 Do “One Time Setup” on page 6.
In order for the VCR to properly interface with your
equipment, sorne setup is necessary.
4 Record on a Tape.
insert a tape
with Record Tab
Press CH Up/Down.
(Select Channel)
O<
oO
x
4 TRACKING >
So
Press SPEED.
{Select speed)
Press REC.
(Start Recording)
Panasonic Sales Company,
Division of Matsushita Electric of
Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infanteria. Km. 9.5
San Gabriel Industria! Park, Carolina,
‘Puerto Rico 00985
Printed in Japan
VQTS3514A