Panasonic Omnivision PV-9450

Tape Operation (continued)
Repeat Play
Set to see a recording over and over.
7 Display menu.
Press ACTION.*
Display SET UP VCR.
Pee 1) Press A¥ to select.
! ORK) || 2) Press ® to display
2 SET_UP_VCR
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
ID 1OMA/ LANGUE: ENGL| SH
SELECT: 4 ¥ KEY
SET :» KEY
SET UP VCA Set ON or OFF.
1) Press AV to select
“REPEAT PLAY.”
REMOTE
WARNING
2)
Press
to
set.
AUTO SHUT-OFF
SELECT:4 ¥ KEY
SET :» KEY
END :ACTION KEY * Playback repeats when tape end is
reached or unrecorded portion over 30
seconds is detected.
Return to normal screen.
Press ACTION twice.
Zero Search
To quickly return to specific tape counter location.
a DISPLAY Display Counter.
Cc) Press DISPLAY during playback.
STOP 12:00AM asc ) Reset to “0:00:00.”
0:00:00
SP Press COUNTER
couNTenREseEr | RESET at the desired
position.
C Continue playback, rewind, or fast forward.
STOP 12:00AM ABC
0:00:30
SP
Return to “0:00:00.”
Eno) Press ZERO/ 1MIN.
1 MIN * The VCR will go into FF
or REW mode and stop at
the last point the Counter
was set to 0:00:00.
18
For
assistance,
call
1-800-211-PANA(7262).
*Important:
If the remote control POWER,
ACTION, PROG, CH A/¥, INDEX,
NUMBERED keys, INPUT, TAPE
POSITION, or ADD/ DLT button does
not work when pressed, press the
VCR button on the remote and try
the button again.
? SELECT/
SET
= A :PLAY
¥ :STOP
» :FF
1 ACTION
4
d ZeRO/
, MIN
A
a DISPLAY.
b COUNTER
RESET
Model PV-9450 remote is shown here.
One Minute Skip
VCR fast forwards over 60 seconds
of recorded tape.
ZERO/
1 MIN
Press ZERO/ iMIN
in Play mode.