Panasonic Omnivision PV-9450

Special VCR Features
Time Stamp Feature
The VCR writes program data (see example below) about the first 10
seconds of every recording. The information is then displayed the first
10 seconds of playback. To change the data, see “Changing Time
Stamp Data” on page 25.
1 Display menu.
Press ACTION.”
Display SET UP VCR.
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
iD 1OMA/ LANGUE: ENGL | SH
SELECT :4 ¥ KEY
SET :» KEY
END =: ACTION KEY
2) Press ® to display.
SET UP VCR
REPEAT PLAY
TIME _ STAMP
2) Press to set.
REMOTE WARN ING
AUTO SHUT-OFF
SELECT:4 ¥ KEY
SET =: ® KEY * When “OFF” is selected, the program
END: ACTION KEY data is written on the tape, but will not
be displayed.
Return to normal screen.
Press ACTION twice.
<Time Stamp Example>
One Touch Recording
Timer Recording
12/27/1998 MON
12:00PM F
12/27/1999 MON When Clock is not set...
CH 08 ABC 12:00PM - 1:00PM
CH 08 ABC MOVIE PRY NERS ERE
MEMORIAL MOVIE ioe.
CH O08 ABC
1) Press AV to select.
1) Press AV¥ to select.
(A check list before you begin.
[J Clock is set to correct time.
[J Record tab in place. (See page 30.)
SELECT/
SET
* A:PLAY
¥ :STOP
3 > :FF
1 ACTION
4
Model PV-9450 remote is shown here.
24 For assistance, call 1-800-211-PANA(7262).