Panasonic Omnivision PV-9450

lial srelat-lale
the remote control POWER, ACTION, PI HA/¥
DEX, NUMBERED keys, INPU
TAPE POSITION, or ADD/DLT button does not work when pressed, press the VCR button on the
remote and try the button again.
Hl Time Zone Adjust
1) Press AV to select
SET CLOCK.
SET UP VCR
SET _UP FEATURE
SET CLOCK
SET UP CHANNEL :
ID 1OMA/ LANGUE: ENGLISH
SELECT:4 ¥ KEY
SET :» KEY
END :ACTION KEY
2) Press P.
AUTO CLOCK SET
MAN UAL
TIME ZONE ADJUST : 0
SELECT:4 ¥ KEY
SET :4» KEY
END :ACTION KEY
3}Press AV to select
TIME ZONE ADJUST
and press < or P to
subtract or add
hour(s) as necessary.
AUTO CLOCK SET
MANUAL _
TIME ZONE ADJUST +1)
SELECT :4 ¥ KEY
40 KEY
:ACTION KEY
4) Press ACTION twice.
5)Press POWER off to
perform AUTO
CLOCK SET.
« TIME ZONE ADJUST
returns to “0” if clock is set
manually.
Add or Delete a Channel
To delete channel:
Select channel with CH A/¥ or
NUMBERED keys and press
ADD/DLT.
To add channel:
Select channel with NUMBERED
keys and press ADD/DLT.
CHANNEL 08 ADDED CHANNEL 08 DELETED
POWER
SELECT/ SET
A:PLAY
¥ :STOP
<:REW
> :FF
ACTION
NUMBERED keys
ADD/DLT
CH AV
Model PV-9450 remote is shown here.
Using AV<4 > keys
You can also operate the menu screen using VCR buttons.
If you use VCR buttons, press CH A and CH ¥ together to display the menu screen.
On Remote
When menu screens are displayed, PLAY, STOP, REWIND, and FF buttons
function as AW & only.
29
YysojQD ‘jeuueyy ‘abenbue7 jesay