file:///E:/PV-9661_PV-9662/SVC/s0602010000.html
6.2.1 CLEANING PROCEDURE FOR THE 
UPPER CYLINDER UNIT
TOP PREVIOUS NEXT 
1.  While slowly turning the Upper Cylinder Unit counterclockwise by hand, gently rub the Video 
Heads with a Head Cleaning Stick (VFK27) moistened with Ethanol.
When using a Cleaning Cassette, make sure to use "DRY" type only and be aware that 
excessive use can shorten head life.
Fig. M1 
Note: 
A.  Do not rub vertically or apply excess pressure to the Video Heads.
Do not turn the Upper Cylinder Unit clockwise while cleaning.
B.  After cleaning, use a Dry Head Cleaning Stick (VFK27) to remove any Ethanol 
remaining on the cylinder tape path. Otherwise, tape damage will occur.
TOP PREVIOUS NEXT 
file:///E:/PV-9661_PV-9662/SVC/s0602010000.html [2006-01-28 11:10:46]