file:///E:/PV-9661_PV-9662/SVC/s0602020300.html
Note:
Do not touch the outside circumference of the rotor surface with any tool and keep magnetic material
away from the rotor magnet (especially metal particles).
Confirmation of Signal Level
1. Supply a Video Signal to the Video Input Jack.
2. Insert a cassette tape and place the unit in SLP recording mode.
3. Connect the oscilloscope to Pin 7 of P2502 on the Capstan Stator Unit.
Confirm that the signal level is greater than 15mVp-p.
TOP PREVIOUS NEXT
To Next Page
Loading...
