file:///E:/PV-9661_PV-9662/SVC/s0602020501.html
Fig. M6-2
Note:
To confirm adjustment, press the Tracking Control Up or Down button on remote control.
Make sure that the envelope waveform remains flat. If not, readjust P2 and/or P3 post heights.
6. After adjustment, confirm that the tape travels without curling at P2 and P3 posts.
7. Remove the jumper after completing the adjustment procedure.
Fig. M6-3
Note:
Overtightening P2 and P3 posts may cause the threads to strip.
To Next Page
Loading...
