file:///E:/PV-9661_PV-9662/SVC/s0401020102.html
4.1.2.1.2 Service Position (2)
TOP PREVIOUS NEXT
1. Remove Top Cover, Front Panel Ass´y, and Operation I/II C.B.A.s. Then, remove VCR
Chassis Unit out of Frame.
2. Place VCR Chassis Unit and Operation I/II C.B.A.s as shown.
Fig. 2-2
CAUTION:
HOT CIRCUIT (Primary circuit) exists on the Main C.B.A.
Use extreme care to prevent accidental shock when servicing.
Note:
When disassembling/assembling, refer to " CABINET SECTION " in Disassembly/Assembly
Procedures.
To Next Page
Loading...
