Panasonic Omnivision PV-9661 - Page 99

file:///E:/PV-9661_PV-9662/SVC/s0502060100.html
5.2.6.1 Disassembly Procedure
TOP PREVIOUS NEXT
1. Remove the Main Cam Push Nut. (Refer to Note.)
2. Pull up on the Main Cam Gear.
3. Turn the Drive Rack Arm fully counterclockwise as shown.
4. Pull up on the Drive Rack Arm.
Fig. J5-1
Note:
When removing the Main Cam Push Nut, press the Main Cam Gear to make space between the Main
Cam Push Nut and Bottom of Chassis. Then, remove the Main Cam Push Nut using a screwdriver etc.
Fig. J5-2
file:///E:/PV-9661_PV-9662/SVC/s0502060100.html (1 z 2) [2006-01-28 11:09:59]