Connections you'll need to make.
Recording (Editing) unit
Playing (Source) VCR
1
Insert
pre-recorded
tape.
Insert blank tape
with record tab.
• Dubbing tapes protected with
Copy Guard will have poor
quality results.
2
Select "LINE" mode.
See "Selecting Input Mode" below.
PAUSEPress PLAY then .r_ ,_=_, Press REC, then
1.# _ _ PAUSE at starting
PAUSE/SLOW
point to put in (_ (_ immediately to put in
Standby mode. Standby mode.
(Perform operation of steps 4 and 5 on both units at same time.)
4
Press PLAY
to start dubbing.
ILOW
Q
Press PAUSE/SLOW
to start dubbing.
5
Press STOP
to stop dubbing.
wrop
®
Press STOP
to stop dubbing.
• Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
Method 1 :
Press CH AV. The display will change as follows.
_,LINE_125 or 69_
Method 2:
a Press ACTION for MAIN MENU,
b Press &Y_I • to select "TV;' then press
ACTION for SET UP TV screen.
c Press AV to select "INPUT SELECT;' and then
press • to select "TUNER" or "LINE?
d Press ACTION twice to exit this mode.
To Next Page
Loading...
