Press DISPLAY to display or remove
the overlay.
Channel
Function Status
\ Current Time
[ • "; • =1_
12.)
Counter
Tape Speed
Whenever a blank section of a tape comes up in
Play mode, or when the selected channel has no
broadcast signal with the Weak Signal Display set
to "OFF" (see page 28), the screen will turn solid
blue.
When a function button is pressed (PLAY, FF, etc.)
or you change channels, the unit mode or channel
number will be displayed.
Warning and Instruction Displays These displays will alert you to a missed
operation or provide further instructions.
PLEASE SET CLOCK BY
PRESSING ACTION KEY
If you attempt to set or review a Timer Recording, or
set the On-Timer and the Clock is not set...
If you press REC, and a cassette is inserted with no 3, 12
CHECK CASSETTE RECORD TAB record tab,..
TO CANCELTIMER REC HOLD
DOWNSTOP KEY FOR APPROX 3 If you press STOP during a Timer Recording... 23
SEC
If you press PLAY, FF, REW, or REC without a 12
NO CASSETTE cassette inserted...
PLEASE PREPARE FOR TIMER If the unit is not in Stop mode or a cassette with
record tab is not inserted two minutes before a Timer 22 - 23
REC Recording is about to begin...
VIDEO HEADS MAY NEED
CLEANING PLEASE INSERT HEAD If head cleaning becomes necessary while playing 4
CLEANING CASSETTE OR REFER back a tape.,.
TO MANUAL END: PLAY
VCR LOCK ACTIVATED 28
If you press a function button other than STOP/EJECT or
POWER while the unit is in VCR Lock mode...
To Next Page
Loading...
