Panasonic Omnivision PV-C1331W

Playback aTape Record Ona Tape
T
[A Ready Check List
OCAll connections are made.
CJ Your unit is plugged in.
—_____.__ | Insert a cassette.
* The unit power comes
on automatically.
To prevent tape jam,
remove loose or peeling labels
from tapes.
2 Press PLAY.
¢ Playback begins if cassette has no
record tab.
@ Forward/Reverse scene search
~ Press FF or REW
> Press again or PLAY to release.
@ Still (Freeze) picture
> Press PAUSE/SLOW
> Press PLAY to release.
@ Siow Motion picture
> Hold down PAUSE/SLOW in
Still mode
+ Press PLAY to release.
@ Frame by Frame picture
~ Press PAUSE/SLOW in Still mode
> Press PLAY to release.
ap
¢ These features work best in SP or SLP mode
(models PV-C1341/PV-C1351W) and SLP mode
(models PV-C1321/PV-C1331W).
* After the unit is in Still or Slow mode for 3
minutes, it will switch to Stop mode automatically
to protect the tape and the video head.
@ Stop > Press STOP
@ Rewind tape > Press REW in Stop mode
@ Fast forward tape — Press FF in Stop mode
@ Eject tape > Press EJECT on the remote
or STOP/EJECT on the unit
You can operate on the unit
@ Press tostop and/or REC Indicator
eject tape.
insert a cassette with record tab.
* The unit power comes on automatically.
Press CH AV or number keys to
Select Channel.
* For “LINE” input, see bottom of next page.
Press SPEED to select recording
speed (see page 37).
SP = Standard Play
LP =Long Play
SLP = Super Long Play
¢ Selected speed is displayed.
Press REC to start recording.
¢ To edit out unwanted portions, press
PAUSE/SLOW to pause and resume
recording.
« You cannot view another channel during
recording.
@ Stop ~ Press STOP
@ One Touch Recording (OTR)
Press REC repeatedly
to set the recording 6
length (30 min - 4 hours.) ~4°*—300*—200— 1:30
¢ The unit stops recording at a preset time.
¢ PROG TIMER indicator lights on the unit.
Normal oe)
* After the unit has been in Rec Pause mode for 5
minutes, it will stop automatically to protect the
tape and the video head.
¢ The remaining recording time of an OTR can be
displayed by pressing DISPLAY.
SELECT/
SET
@:CH UP
¥:CH DOWN
>:VOL UP
4:VOL DOWN