Panasonic Omnivision PV-C1331W

TV Timer Features
A Ready check List
This unit can be set to automatically power on in one J The clock is set to correct time.
of 3 modes (TV, Playback, or FM radio.)
You can also combine the On-Timer with a one |
minute alarm that gradually increases in volume.
Press PROG
to display SET PROGRAM screen.
f°. Cat Gams 1) Press AY to select
eo ie . “ON TIMER.”
:. 2)Press P to display
- - ON TIMER screen.
1) Press AY to select
desired settings.
2) Press » to set the
ON-TIMER TIME or
ON-TIMER mode.
¢ Make sure a tape is
* ON-TIMER mode inserted if Playback mode
is selected.
COS ae ee Ty e See “EM Radio” on page
3
CHO1 PLAY 21 for instructions on
FMo—FM8---FMi——— how to preset FM
stations.
Press AV to select CHAY = ONTIMER
a} ALARM “ON” or “OFF.” Indicator
When “ON” is selected,
an alarm will pedualy increase in volume for one
minute or unti! canceled by pressing any button
(including VOL + -)
To Make Cee
use AV and <> to move back and correct.
Press PROG
5 to set ON TIMER.
¢ “ON TIMER lindicator lights on the unit.
ro vance Oe aoe If no button on the remote or unit
Repeat steps 1 and 2. Then, press ADD/DLT to clear :
the time in step 3. Now, press PROG to end. (including a button used to turn off
aces the alarm) is pressed within 60
“ON TIMER END” briefly appears on-screen. minutes after unit turns itself on, it
wilt turn itself back off.
18
For assistance. please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts @ panasonic.com