Select the type of sound track you desire for playback.
2
Playback the tape.
See the "Playback a Tape" section on page 16.
P_T_ I1:00PM.Q:12:_
4
MIFI)
HIFI_
Select desired mode.
repeatedly (each
press within 5
seconds.)
• Please select
"HIFI (L/R)", "HIFI (L)"
or 'I-IIFI (R)" to listen
to stereo recordings
in stereo sound.
Select "NORMAL" for
monaural sound.
• This screen appears when you press AUDIO during playback.
Selectthe typeofbroadcastyouwishto record.
a o
AUDIO
Press AUDIO to select
the desired audio
mode. (See page 153
• Your recording is always
performed according to the audio
mode you selected.
With the proper audio mode setting,
your unit can:
• record and playback MTS stereo
broadcast (main language) in stereo Hi-Fi.
Stereo sound is recorded on the left and
right audio tracks and on the video portion
of a tape.
• record and playback monaural broadcast
(main language) or SAP (Second Audio
Program, usually in a second language)
on the Hi-Fi tracks for better quality
monaural sound.
• playback non-Hi-Fi tapes in monaural.
AUDIO
b Do a recording.
See the=RecordOn a Tape"sectionon page 17.
• When purchasing or renting prerecorded tapes, remember that only
those recorded in Hi-Fi stereo will playback with true stereo sound.
Standard stereo tapes will playback with monaural sound.
• In order to listen to Hi-Fi stereo playback, the unit AUDIO (L/R) jacks
must be connected to a stereo amp and speakers.
• There may be a difference in audio level between Hi-Fi and normal
audio playback.
34
lio] dl_ !.-.!.1k'1 iSl ii_-.pl_-:, ii Ii B:fl[IBS, I JIB "J!| _ p_TtMJ_J i
To Next Page
Loading...
