When DISPLAY is pressed, On-Screen Displays show disc
information (title/chapter/track number, elapsed playing time,
audio/subtitle language, and angle) and unit information
(repeat play, play mode, Karaoke vocal ON/OFF, etc.).
Display On-Screen
Displays.
I Press DISPLAY in play or
stop mode.
• Each time DISPLAY is pressed,
On-Screen Display changes as
shown below (refer to 42 or 43
page.)
Q
DISPLAY button does not function
while DVD TITLE MENU is
displayed.
I Selected di_lcinformation
Selected _nit information
NormaI Screen
2
Select the desired item.
1) Press AV (or <•) to
select.
2) Press SET to set.
3÷J
<Exampleof DVD>
<Example of Video CD>
Select the desired
setting,
1) Press &V to select•
2) Press SET to set.
• For some functions the setting will
be registered immediately without
pressing SET.
• When numbers are displayed (e.g.
title, number), the NUMBERED
keys are also available.
To make corrections,
repeatedly press AV and SET to
move to error, then correct.
• Pressing ,d is effective for elasping
time instead of the above buttons,
Press < repeatedly to delete the
01_0:_/ error, then correct.
L
To return to the normal
II _'iDS)_ screen,
0:12:_I press RETURN or DISPLAY
_1 repeatedly.
_Check list before you begin.
[] Itis necessary,pressDVD<-*TVto
enter DVDmode.
1DISPLAY
NUMBERED
keys
RETURN
SELECTAV< •
3
2 SET
O
When DISPLAY button is pressed during playback of a Video CD with
Playback control, the NUMBERED keys are not available on the
displayed screen. In this case, press DISPLAY again to remove the
displayed screen.
• When _ appears on the screen while a
button is being operated, it means that
the corresponding operation is prohibited
by the unit or the disc.
41
To Next Page
Loading...
