On-Screen Displays (OSD)
Channel & Function Display
Whenever the channel is
changed, the channel
number will appear for a few
seconds on-screen.
(Some station names may
also appear if Channel
Caption is set. See page 20.)
When a function button is
pressed (PLAY, FF, etc.), the Combination VCR
mode will be displayed.
• When a recording is started, both REC and
the channel number will appear together.
08
ABC
Warning and Instruction Displays
These displayswillalertyouofa missedoperationor
providefurtherinstructions.
If no active channelsare
found forCHANNEL
MEMORY...
(seepage5.)
NO CH FOUND
PLEASE CHECK ANTENNA
CABLE CONNECTION THEN
PUSH CH UP KEY AGAI N
Ifyouattempttosetor
reviewa TimerRecordingor
settheOn-Timerandthe
Clockisnotset...
(see pages8, 9.)
PLEASE SET CLOCK
BEFORE PROGRAMId I NG
Menu Screen
1Press ACTION to
display the MAIN
MENU.
2 Press AV4b, and
ACTION to make your
selection (see page 8).
• To getthe mostfromeachfeature,
pleasereadtheOperationManual
beforeattempting anyoperation.
IfyoupressRECon the
remotecontrolorthe
CombinationVCR, anda
cassetteisinsertedwithno
recordtab...
(seepage 17.)
Ifyou press STOP
during a Timer
Recording...
(see page 19.)
CHECK CASSE'rI_
RECORD TAB
TO CANCEL TIMER REC
HOLD OOWN STOP KEY
FOR APPROX 3 SEC
VCR Status & Clock Display
Press DISPLAY to display and remove the
overlay shown below.
Rec
Remaining
(OTR mode
onlysee
page17.)
Function Current ChannelCaption
Status Time (See page20.)
f
0:25
,Bc/
-0:12:34
SP
\
Ta
\Tape Speed
)e Counter
If you press PLAY,FF,
REW, orREC onthe
remote controlorthe
CombinationVCR without
a cassetteinserted...
(seepages16, 17.)
IftheCombinationVCR is
notin Stopmodeora
cassettewithrecordtab is
notinsertedtwominutes
beforea TimerRecording
isabouttobegin...
(see pages18, 19.)
If head cleaning becomes
necessary while playing
back a tape...
(see page 25.)
NO CASSETTE
PLEASE INSERT A CASSETTE
PLEASE PREPARE
FOR TIMER REC
r
V IDEO HEADS MAY
NEED Ct.EANI NG
PLEASE INSERT HEAD
Q.EANING CASSETTE
ON REFER TO MANUAL
END:PLAY KEY
Blank Tape/No Video Signal Indication
Whenever a blank section of a tape comes up
in Play mode, or when the selected channel
has no broadcast signal with the "Blue Back
ON/OFF Feature" (page 21) set to ON, the TV
screen will turn solid blue.
10
If you press a function
button other than
STOP/EJECT or POWER
while the Combination VCR
is in VCR Lock mode...
(See page 21.)
V_R LOCK ACTIVATED
To Next Page
Loading...
