Ol
ON TIMER Indicator
2.
3
DISPLAY'
,SLEEP
ADD/
DELETE
On-Timer with Alarm Feature
The Combination VCR can be set to automatically power on in one of 3
modes ('IV, Playback, or FM radio). You can also combine the On-Timer
with a one minute alarm that gradually increases in volume.
1 Press ON-TIMER to display the ON
TIMER screen.
2 Press AV to select and • to fix
the On-Timer time and also to
choose the On-Timer mode (TV,
PLAY, or FM radio). See the AV
selection order shown below.
• Make surea tape isinsertedifPlayback
mode isselected.
• See "FM RadioFeature"onpage 15 for
instructionson howto presetFMstations.
_CH02mCH03 ..... CH125-_
CH01 PLAY
L,FM9--FM8.....FMI----J
...........
i- ...........
/m
I .... _°°"
| CANCEL:ADD/DLT KEY
/ SELEC'r:Av KEY
/ SET :4 I_ KEY
L ENO :ON-TIMER KEY
3 15ress AV to select alarm "ON" or
"OFF."
When "ON" is selected,
an alarmwillgraduallyincreasein
volumefor one minuteoruntilcancelled
bypressing any button onthe remoteor
/ CANCEL :ADO/DLT KEY
I SELECT :& _r KEY
/SET :4=, KEY
( ENO :ON-TIMER KEY
Combination VCR (including VOL 4_ ). When the alarm sound
stops, the sound of the mode you selected will ensue.
To Make Corrections,
use AY and 4b, to move backand correctas necessary.
A
€-IFPress ON-TIMER to set the On
Timer. This screen will appear for
about 5 seconds.
• The ON TIMER indicator lightson the front
panel.
ON TIMER SET
To cancel,
press ON-TIMER to redisplay the screen in step 3. Then, press
ADD/DLT to clear the time ("6" is flashing). Now, press ON-TIMER
to end. "ON TIMER END" appears on-screen for a few seconds.
Set the Sleep Timer
The Combination VCR canbe set forautopower off.
Press SLEEP repeatedly to set the sleep
timer.
• Eachpresswillchangethe timeinthe-ordershown
at right.
• Ifyoupres,s_DISPLAYwiththeSLEEPTIMER set,
the remainingtimewillappearon-screen.
t
SLEEP TIMER 30
SLEEP TIMER 60
4,
SLEEP TIMER 90
4,
SLEEP TIMER O0
I
To Cancel, pressSLEEP repeatedlyuntil=SLEEPTIMER 00" appears.
13
To Next Page
Loading...
