"One Time Setup
WhentheCombinationVCR isturned onfor
thefirst time, itautomaticallyentersthe
setupmode.Setupincludesthe following:
• Choosethelanguageforon-screenmenus
and messages.
• Tellthe CombinationVCR howyour
equipmentishookedup(page5) sothe
CombinationVCR cancorrectlyplace
channelsintomemory.
• Get theCombinationVCR readyfor clockset.
_'Check list before you begin.
[] Your CombinationVCR isconnected to an
Antenna, orCable system (see page 5).
1
[ 1
_k/ Ooeo_ r3r_Tr_=oo ©®
_-. \ "_t-_-'
2 2-3.4
1
ACTION
DELETE
SELECT/
SET
( Av• • )
keys
2.
3.
4
To Set Language, Channels and Clock
1 Press POWER to turn the Combination VCR on.
2 Press CH AV, or VOLb, for on
screen displays in English,
Spanish or French.
• If you choose the wrong language,
please see the =Reset all Combination
VCR Memory Functions" section on
page 25.
• If you use a cable box, the cable box must be left on for auto
channel set.
SELECTLANGUAGE
PUSH CH • :English
OPRIMIR CH • :Espa_ol
APP. VOL + :Fran_ais
Important: If you use a cable box, turn it on and select
the PBS station in your time zone.
3 Press CH • to start Channel
Auto Set and Clock Auto Set.
These on-screen displays will
appear in sequence.
° CH AUTO SET PROCEEDING
- ° CH AUTO SET COMPLETED
• AUTO CLOCK SET PROCEEDING
712811998TUE12:00PM
DST:ON
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
END : PUSH CH UP KEY
I CHANNEL/CLOCKAUTOSET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX, TUNE I T TO YOUR
LOCAL PBS CH THEN...
PLEASE PUSH CH UP KEY
AUTOCLOCK SET
iS t NCOMPLETE
PUSH ACTION TO SET CLOCK
4 If the displayed time is correct, press CH • to
exit.
°This concludesonetime Combination VCR setup.
• See important note at the bottom of this page.
If the displayed time and DST. are not correct...
If you happen to live close to two time zones, the Combination VCR may
have recognized the PBS channel (setting channel) in the wrong time
zone. Please do the following to correct the situation.
a. Make a note of the SETTING: CH number shown on-screen and
press CH • to exit.
b. Delete the setting channel from the Combination VCR channel memory.
(See the Add or Delete a Channel section on the next page.)
c. Press ACTION to display the MAiN MENU.
d. Press •V<!_ to select =CLOCK," and then press ACTION to display
the SET CLOCK screen. ' '
• If you use a cable box and have multiple PBS stations, tune the
cable box to a different PBS station and try auto clock set again "
using the menu.
e. Press •v to select =AUTO CLOCK SET," and then press • to set
and CH • to start Auto Clock set.
Usin_ the AV < • keys
Whenever a menu or program
screen is displayed, CHANNEL
UP/DOWN and VOLUME UP/DOWN on
the remote control function as AV<•
onFy. For VOLUME UP/DOWN functions,
use the buttons o.nthe Combination VCR.
8
IMPORTANT NOTE FOR AUTO CLOCK SET
• Auto clock set will be performed when the Combination VCR istumed
offthe firsttime each day. If you use a cable box and you want auto
clock setto be performed, the cable box must be left on and tuned to
the PBS channel at the time the COmbinationVCR power is turned off.
• If you use Audle/Video Jack connection between the Combination VCR
and Cable Box, you must also connect the RF coaxial cable inorder to
usethe auto clock set and channel auto set features.
• If for any reason the time ischanged manually, automatic time
correction will not occur.
To Next Page
Loading...
