VHS Index Search System
Each time recording is made, an invisible index mark is placed on the tape. When timer recordings are made, program
index and information are also included. These index marks can be used to access or scan recordings.
Go directlyto desired recording.
1
Display SELECT SEARCH
MODE.
Press INDEX.*
• It there are no timer recordings on the
Program Index List,go to step 3.
REW
2
3
4
8ELECT SEARCH MODE
_ SEARCH
SELECT:& • KEY
SET :, KEY
END :INDEX KEY
Display INDEX.
.,p.. 1) Press AY to select.
,=(_.,.l 2) Press • tO display.
; This screenappears only if
"== i here are imer recordings.
INDEX
Select the recording number.
O Q G_ Press NUMBERED
(_ Q _ keys.
(_ (_) • To calculate number,
see betow.
_NSEX 041 Start search.
• I_ _ Press FF or REW.
°XE/I0
or finished, playback
begins.
SELECT/
• :PLAY
• :STOP
I_:FF
FF
NUMBERED
keys
1INDEX
• To Calculate Index Number
Example 1:
If you are watching recording 4 and you want to watch recording 2,
enter 3 in step "3" and press REW.
Example 2:
If you are watching recording 2 and you want to watch recording 6,
enter 4 in step "3" and press FF.
1112 1 1 1'1 °
NOTE: _,indicates start points of each recording.
16
• Make each entrywithin 10 seconds, or
the index Search mode willbe canceled.
• If DirectAccess or Index Scan is started
very close to an index mark, that index
mark may not be counted in the search,
To Next Page
Loading...
