The VCR writes program data (see example below) about the first 10
seconds of every recording. The information is then displayed the first
10 seconds of playback. To change the data, see "Changing Time
Stamp Data" on page 23.
Display menu.
Press ACTION.*
_lPCheck list before you begin.
[] Clock is set to correct time.
[] Record tab in place. (See page 28.)
2
......... MENU .........
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
Ie IOMA/LANGUE: ENGL ISH
SELECT:A • KEY
SET :b KEY
END :ACTION KEY
Display SET UP VCR.
1) Press AV to select.
,_(_, 2) Press • to display.
I ...... SET UP VCR ...... /
REPEAT PLAY OFF
ON
AUTO SHUT-OFF ON
SELECT:& • KEY
SET :_ KEY
END :ACTION KEY
Set ON or OFF.
_, ) Press _,V to select.
2) Press • to set,
• When "OFF" is selected, the program
data is written on the tape, but will not
be displayed,
<Time Stamp Example>
One Touch Recording
Return to normal screen.
Press ACTION twice.
Timer Recording
l Wben Clock is not set...
SELECT/
2SET
3 A:PLAY• :STOP
• :FF
ACTION
4
22
To Next Page
Loading...
