Panasonic Palmcorder PalmSight PV-L857 - Page 13

Setting the Clock
Setting the Date and Time
The date and time is calculated, including
leap year, up to DEC 31 2095.
I
-5-00:0CcPM-
JAN 1 réde
Before you begin...
» Connect the Palmcorder to a power source.
* Set the POWER switch to VCR or CAMERA.
Note:
The Palmcorder will exit the CLOCK SET
menu if, after activation, none of the CLOCK
SET UP/DOWN, (A/Y) or DISPLAY buttons
are pressed within 30 seconds.
pavers Bunje9
I Press CLOCK SET UP A to display
the CLOCK SET menu.
Press UP A or DOWN Y repeatedly
to select KE Wi ALT EST a EE.
---CLOCK 8ET---
1.SELECT TIME ZONE
4.END
SELECT: PUSH F/A KEY
SET : PUSH DISPLAY KEY
3 Press DISPLAY to display the
DATE/TIME SETTING menu.
" M UP A or DOWN Y repeatedly
(or hold down) to enter the desired
numbers, then press DISPLAY to fix
that portion and move on.
x ls
6-00-00PM
JAR'1 1996
Adjust the flashing digits for the hour,
minute, month, day, and year.
---DATE/TIME SETTING -- -
sis «12
-12:00:08AM
J'AN
SELECT: PUSH V/A KEY
SET : PUSH DISPLAY KEY
When you finish setting the year, the
clock starts operating, and the CLOCK
SET menu appears.
1 f996
To exit from the CLOCK SET menu,
press DOWN Y to select EXIT, and
then press DISPLAY.
13