Panasonic Palmcorder PV-S64 - Charging the Battery Pack; Using the Battery Pack

2
a"nr,TC, arn';a'r.e
8
2
Charge the Battery Pack fully before operation
1
Plug in the AC Adaptor. SA_ER¥
REFRESH
POWER CHARGE
lights up.
PowerIndicator
Insert the Battery
Slide the top of the Battery forward then
3ress down until it locks with a click.
• Battery Pack charges in about 2 hours.
BATTERY
REFRESH
POWER CHARGE
Charge Indicator lights up.
Remove the Battery
(A) Slide Battery forward.
(B) Lift up and out. BATTERY
REFRESH
POWER CHARGE
Charge Indicatorgoes out when
charging is done.(About two hours.i
• With a fully charged Battery Pack, you will
have about 1.5 hours of continuous use.
Use the Battery completely before
recharging.
Note:
After recharging the Battery Pack about 5
times, use the BATTERY REFRESH
feature as explained on page 10.
*Use this marker as a reminder to yourself
when the battery is fully charged or in need
of a charge. This marker performs no
function and is for your reference only.
]
To Attach the Battery
Align the battery with the top of the
mounting surface and press it firmly into
place until it locks with a click.
To Remove the Battery
While sliding the BATTERY RELEASE
button, remove the Battery from the
mounting surface.