Panasonic Palmcorder PV-S64 - Supplying Power; AC Adaptor Operation; Car Battery Cord Operation

fD _. Power Indicator
C Power Lam
_,_able _ P
_Dc Outpu
_€onnectorj) []
1
Connect the DC Output orl the AC
Adaptor to the DC Input on the
Palmcorder with the DC Power Cable
(supplied).
2
Plug in the AC Adaptor.
• The Power indicator will light up.
BA'n'ERY
REFRESH
POWER CHARGE
Note:
AC Adaptor does not function while
charging the Battery.
/_C input "_
_onnectorj) _1
1
Car Battery
Cord (optional)
Cigarette Lighter_
ocket (12V) j/
Cigarette _'_
ighter Plugj)
1
Connect a PV-C16 Car Battery Cord to
the DC Input of the Palmcorder.
2
Start your car engine and then insert the
Car Battery Cord plug into your
cigarette lighter socket.
• There is a fuse located in the lighter plug
end of the cord.
Should fuse replacement be necessary
use the exact current rating (in amps).
Note:
This cord can only be used in vehicles
equipped with DO 12V (negative ground)
batteries.
Use only the specified car battery cord.
9