Panasonic PanaSync E70 User Manual

IMPORTANT
NOTICE
CONCERNING
POWER
CORD SELECTION
The
power cord
for this
unit has
been packed
separately
and has been selected
according
to
the
country of destination and must be
used
to prevent electric
shock.
Use the following guidelines
if
it is
necessary
to
replace the original
cord set.
The female receptacle of the cord set must meet CEE-22 requirements
and will
look like Figure
1
:
For the United States and Canada
In
the
United
States
and
Canada the male
plug
is
a
NEMA
5-15
style {Figure
2)
and is
UL
listed
and
CSA
labelled. For units which are mounted
on
a
desk
or
table, type
SVT
or
SJT cord sets
may
be
used.
For units which
sit on
the floor, only SJT type cord sets may be
used.
The
cord
set must be
selected
according
to
the
current
rating for
your unit. Please
consult Table A for the
selection
criteria
for power cords used in the United States and
Canada.
(The
cord set is marked
with its Cord
Type.)
For European Countries:
In Europe you must
use a
cord
set
which
is
appropriate
for the receptacles in your country.
The cord set is HAR-Certified, and the mark
4
HAR will
appear on the
outer sheath, or on
the insulation of one
of
the
inner
conductors.
If you have any questions concerning the proper power
cord to
use,
please
consult with the dealer
from whom
you
purchased
your unit.
Table A
Cord
Type Size of Conductors In Cord Maximum
Current Rating of
Unit
SJT
18AWG 10Amps
16AWG
12Amps
14AWG
12Amps
SVT 18AWG
10Amps
17AWG
12Amps

Panasonic PanaSync E70 Specifications

General

Brand	Panasonic
Model	PanaSync E70
Category	Monitor
Language	English