Panasonic PanaSync E70 - Page 9

Installation
Connecting
Procedures
Turn off your computer.
Connect
the signal
connectors
as
shown
below.
Turn
the
monitor on, then turn
on
the
computer.
A.
IBM PS/2 or
compatible models
Rear
view
15-pin
mini
D-Sub
cable
©
Connect the
supplied
signal
cable to the monitor's
port.
®
Connect
the AC Power cord to the monitor
CE22
connector
on
the
rear of the monitor.
(D
Connect the
other
end of the AC Power cord to a grounded power outlet.
B. Apple computer
Use a UNIMAC-82D MAC adapter.
Panasonic MAC adapter
If
you
need
an adapter and one is not provided by your
dealer,
call
1-800
PANASYS
(1-800-726-2797).
Connection of AC Power
Supply
Precaution:
•
In order to
use
the
display
unit
safely,
use a
power cord that
is properly
grounded.
•
AC
Power
cord
for the following
countries are supplied
in
the
same package.
U.S.A
UL
Canada CSA
For
use
in
other countries,
make sure the AC
Power
cord
meets
the
safety standards of each country.
-5
-