Panasonic PJLink PT-LW330

ENGLISH - 79
Using useful functions
Memory Viewer function
The Memory Viewer function makes it is possible to project the video and pictures which are stored in the USB memory when
the USB memory is inserted into the projector.
r What you can project with the Memory Viewer function
Memory Viewer function supports the following image les.
Video
Extension Video codec Audio codec Video format
avi
MotionJpeg ADPCM
YUV 4:4:4, YUV 4:2:2, YUV 4:2:0
Maximum : 1 280 x 720, 30 fps
Picture
Extension
Format Description
jpg/jpeg
Baseline coding 24 bits
Progressive RGB 24 bits
Resolution : 8 x 8 ~ 10 000 x 10 000
Resolution : 8 x 8 ~ 1 280 x 800
bmp
Palette-based 1, 4, 8 bits,
RGB 24, 32 bits
The maximum resolution : 1 280 x 800
png
True color 24 bits/48 bits The maximum resolution : 1 280 x 800
gif
Palette-based 1, 4, 8 bits,
Palette - 24 bits color spaces;
The maximum resolution : 1 280 x 800
tif / tiff
The maximum resolution : 1 280 x 800
pdf
Note
f The maximum size of le is 2 GB.
f The maximum number of le/folder is up to 500. If it exceeds the folder cannot display and an error message appears.
f You cannot play the les which is protected by Digital Rights Management (DRM).
f You cannot play the PDF les which are protected by security setting.
f It maybe impossible to resume playing even if the le is recorded in the supported format.
r The related device
It is compatible with the USB memory sold in the market. (Do not ensure the security.)
It cannot be used the other format other than the formatted with FAT16 and FAT32.
Displaying the Memory Viewer screen
1) Press the <MEMORY VIEWER/USB DISPLAY> button on the remote control or switch the input source
to [Memory Viewer].
f Press the <INPUT/ENTER> button on the control panel and select the input source in the Input menu.
2) Insert the USB memory directly into the <USB A (VIEWER)> terminal.
f The standby screen “please press RC ENTER ” is displayed while the USB memory icon is displayed at the lower left of
the screen.
f When the partition are separated in USB memory, several USB icons will be displayed.
3) Press the <ENTER> button on the remote control.
f The root directory of the USB memory will be displayed in thumbnail on the screen.
Playing the pictures
It will display a picture when play the picture manually every time.
1) Press asqw on the remote control to select a file.
2) Press the <ENTER> button on the remote control.
f The picture will display on the full screen.
3) Press w to switch to the next picture, press q to return to the previous picture.
4) Press the <ENTER> button on the remote control.
f Return to the thumbnail screen.
Chapter 4 Settings - Using useful functions