Panasonic PV-20DF25

19
TV Operation
This unit can be set to automatically power on in one of 2 modes
(TV or Disc.)
Note:
• If no button on the remote or unit is pressed within 60 minutes after unit
turns itself on, it will turn itself back off.
1 Press TIMER to display SET TIMER screen.
To Cancel ON-TIMER,
Repeat steps 1-3. Then, press ADD/DLT to clear the time in
steps 4-5. Now, press TIMER to end. “ON TIMER END” briefly
appears on-screen.
2 Press ▲▼ to select “ON TIMER.”
3 Press SET to display ON TIMER screen.
4 Press ▲▼ to select desired settings.
5 Press SET to set the ON-TIMER time and ON-TIMER
mode.
To Make Corrections, use ▲▼ and ◄ ► to move back and
correct.
6 Press TIMER to set ON TIMER.
• “ON TIMER SET” is displayed.
• ON-TIMER Indicator lights up on the unit.
This unit can be set for auto power off.
1 Press TIMER to display SET TIMER screen.
2 Press ▲▼ to select “SLEEP TIMER.”
3 Press SET repeatedly to select the desired time.
To cancel, press SET repeatedly
until 0 appears.
4 Press TIMER to return to the normal screen.
• Pressing DISPLAY with sleep timer set displays remaining time.
• Make sure a disc is inserted if Disc (DVD/
CD/Video CD) mode is selected.
ON-TIMER
Sleep Timer
TIMER
DISPLAY
ADD/DLT
30 60
0 90
ON-TIMER mode
selection order
CH01
CH125
Disc
Lowest
channel
Highest
channel
TV Timer Features
SELECT
▲▼◄►/
SET
ON-TIMER
Indicator
ON TIMER
10:00AM CH 05
CANCEL:ADD/DLT
SELECT: SET:SET
END :TIMER
SET TIMER
ON TIMER
SLEEP TIMER: 0
SELECT: SET:SET
END :TIMER
SET TIMER
ON TIMER
SLEEP TIMER: 0
SELECT: SET:SET
END :TIMER
ON TIMER
6:--AM CH --
SELECT: SET:SET
END :TIMER