Panasonic PV-C2541 - Page 13

Time Zone Adjust
Important: if a remote control button does not work
when pressed, press the COMBO button
on the remote and try the button again.
E Time Zone Adjust
(Only when Auto Clock is set.)
1) Press AW4b to
select "CLOCK."
ACTION.
2) Press ACTION.
SET CLOCK
ACTION key on
AUTO CLOCK SET :
the unit
MANUAL
TIME ZONE ADJUST :O
SELECT:4 ¥
SET 4»
END ‘ACTION
3) Press AV to select
TIME ZONE
ADJUST and
press dor» to
subtract or add
On Unit
You can operate the
menu screen using
unit buttons.
hour(s)
as
To
display
the
menu,
necessary.
press
STOP/EJECT
and REW together
with no tape inserted.
To exit the menu,
repeat above with or
without tape inserted
until normal screen
appears.
SET CLOCK
AUTO CLOCK SET
MANUAL
SELECT:A Y
SET 4
END — :ACTION
4)Press ACTION
twice to exit. To add channel:
*
TIME
ZONE
Select
channe!
with
ADJUST
returns
to
number
keys
and
“0”
if
clock
is
set
press
ADD/DLT.
manually.
CHANNEL 08 ADOED
SELECT/
SET
4:CH UP
v:CH DOWN
>:VOL UP
4:VOL DOWN
MIC a1seg
On Remote ‘On Unit
y : CH DOWN
» : VOLUME UP
« : VOLUME DOWN
Whenever the menu or program
screen is displayed, CHANNEL
UP/DOWN function as AV and
VOLUME UP/DOWN function as
« b» only.
Add or Delete a Channel
To delete channel:
Select channel with CH
AY or number keys and
press ADD/DLT.
CHANNEL 08 DELETED