Panasonic PV-C2541 - Page 16

A
a «Important: if a remote control button does not work
TV
O
pe
r
at
|
O
n
when
pressed,
press
the
COMBO
button
on the remote and try the button again.
1
Press
POWER’
on
the
remote
or
¡Y
Ready
Check
List
unit. ; D All connections are made.
O Your unit is plugged in.
2
og
|
Use
CH
AY
or
asc | number keys to
select a channel.
Press VOL + or VOL -
to adjust volume.
VOL +/VOL-
PLAY/
REPEAT
24 WILL aser
NIGHT (NITE) Mode
Color
and
picture
intensity
levels
are
adjusted
so
the
E E
CL
AA
screen
is
easier
on
your
eyes
during
night
time
use.
CHAY
PHONES
NIGHT
)
Press
NITE
to
set
NIGHT
Jack
mode.
POWER
* NIGHT mode may be selected
when watching TV, playing a
tape, or while in FM mode.
Press NITE to cancel.
* Previous settings are restored.
* NIGHT mode is canceled
when power is turned off or
power failure occurs.
BW Using the 100 key
When selecting CABLE channels 100 to 125
with the number keys, first press the 100 key,
and then enter the remaining two digits.
E Rapid Tune
Press R-TUNE to display the last channel you
were watching.
B Audio Mute
Press MUTE to instantly mute the sound. Press
again to restore the previous sound level.
BB Phones
Connect an earphone (not supplied) or
headphones (not supplied) to the Phones Jack.
16
For
assistance,
please
call
:
1-800-211-PANA(7262)
or
send
e-mail
to
:
consumerproducts@
panasonic.com