Panasonic PV DF2004

34
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
5 Press PROG to end the program. To
Enter More Programs, press ▲▼ to
select and SET to set a blank
program number, and then repeat
step 4.
6 Press PROG twice to exit this mode.
1 Press PROG to display SET
PROGRAM screen.
2 Press ▲▼ to select “TIMER
PROGRAMMING.”
3 Press SET to display screen.
• If a program is already in memory, press ▲▼,
and SET to select an unused program
number.
Repeat step 4 to set:
• Start time, stop time
• Channel (or LINE for outside source)
• Speed (
SP, SLP)
• If you’re using a cable box, make sure that it
is tuned to the desired channel and the power
is left on for timer recording.
• PROG TIMER Indicator lights up on the unit.
SET PROGRAM
TIMER PROGRAMMING
ON TIMER
SLEEP TIMER: 0
SELECT: SET:SET
END :PROG
Timer Recording
Set Up to Programs
SET
SELECT
▲▼◄ ►
STOP
ADD/DLT
PROG
You can set up to 8 programs to be
recorded while you are away.
P DT START STOP CH SPD
1 -- --:-- --:-- -- --
2----:----:-- -- --
3----:----:-- -- --
4----:----:-- -- --
SELECT: SET:SET
END :PROG
P DT START STOP CH SPD
1 10 9:00a12:00p 08 SP
2----:----:-- -- --
3----:----:-- -- --
4----:----:-- -- --
SET COMPLETED
CANCEL:ADD/DLT
SELECT: SET:SET
END :PROG
4 Press ▲▼ to select and SET or ◄►
to set the recording DATE.
• 1~31 = One time
• DAILY (day) = Monday~Friday
• WEEKLY (SU~SA) = Same time once a week
Example:
Today’s
Date
WEEKLY
(SA)
7
WEEKLY
(MO)
8
31
1
6
WEEKLY
(SU)
DAILY
(day)
PROG TIMER Indicator