Panasonic PV-DV950 - Basic Recording; Starting and Pausing Recording; Tally-LED Indicator

Recording
When the Mode
Selector is
set
to [AUTO]
O.
y°u
can
simply
turn on the
Movie Camera
and
press the
Start/Stop
Button
to start
recording,
and
the
focus and
white balance
are
adjusted
automatically.
•
Depending
on the
light source
and recording
situation,
correct
automatic
focusing and
white balance
adjustment
may not be
possible.
In
such
cases,
adjust
them
manually.
Focus: {-¥
20);
White Balance: 42, 43)
1
Set
the
[POWER
ON/OFF]
Switch
to
[ON].
The
[CAMERA]
Lamp
lights.
0
2
Press the
Start/Stop Button.
Recording
starts.
The
[RECORD]
Indication
appears
briefly and
then
changes
to
[REC].
©
3
To pause
recording:
Press
the
Start/Stop
Button
again.
The
[PAUSE]
Indication
appears.
Q
4 To finish
recording:
Set
the
[POWER
ON/OFF]
Switch to
[OFF]-
+
If
you
leave
the
Movie Camera
in the
Recording
Pause
Mode
for
more than
5
minutes,
It
automatically
switches off
to
protect
the
tape
and
to
conserve
battery
power. To
resume
recording
from
this
condition, set
the
[POWER
ON/OFF]
Switch to
[OFF]
and
then to
[ON]
again.
Tally-LED
The
Tally
LED
©
lights during
recording to
indicate that
recording is
being
performed.
If you select
[OTHERS] on the
Menu and then
set
[TALLY-LED] to
[OFF], the
Recording Lamp does
not
light. (-»
62-64)
-17-