Panasonic PV-DV950 - Searching for End of Tape; Blank Search Function

Searching
for
the End
of
the
Recorded
Part
on a Cassette
(Blank
Search)
With the Blank
Search Function,
you can quickly
locate
the
end of the
recorded part on
a cassette (or a
blank
part
between
recordings).
1
Press
the
[VCR/CAMERA]
Button
so
that
the [VCR] Lamp
lights.
O
2
Press the
[MENU] Button.
The
Menu
appears.
3
Turn the
[PUSH] Dial
to select
[B.
SEARCH].
4
Press
the [PUSH]
Dial to
select
[ON].
Approximately
1
second before the
end of the
last
recorded
scene,
the
Movie
Camera switches
over to
the
Still Playback
Mode.
•
If there
is no blank
part on a
cassette, the
Movie
Camera stops
at the end
of
the tape.
•
When the
Blank
Search
has finished,
you can
press
the
[VCR/CAMERA]
Button
so
that
the [CAMERA]
Lamp
lights,
and
then start
recording.
The new
scene is
recorded
with a
smooth
transition from the
last to the
new scene.
-32-