2-16
1 Top Plate
See Note 3.
Boss (A)
Boss (B)
Side Plate R Ass'y
Side Plate L
Locking Tab (C)
Locking Tab (C)
2 Wiper Arm
Unit
3 Holder
Unit
Locking Tabs (A)
Groove
Locking Tabs (B)
Drive Rack
Unit
Groove
Groove
Groove
DISASSEMBLY/ASSEMBLY
PROCEDURES OF CASSETTE UP
ASS'Y
Top Plate, Wiper Arm Unit, and Holder Unit
Disassembly Procedure
1. Remove Top Plate by releasing 2 Locking Tabs (A) on the
left side and 2 Locking Tabs (B) on the right side of the Top
Plate.
2. Remove Wiper Arm Unit by releasing 2 Locking Tabs (C).
Then, remove the Holder Unit.
Fig. K1-1
Loading Rack Unit
Disassembly Procedure
1. Slide the Loading Rack Unit as indicated by the arrow.
Then, pull up on the Loading Rack Unit.
Fig. J15
Reassembly Notes
1. Alignment of Loading Rack Unit
1) When installing Loading Rack Unit, refer to Reassembly
Notes of "T Loading Arm Unit and S Loading Arm Unit."
37 Loading Rack Unit
Slide
To Next Page
Loading...
