EasyManua.ls Logo

Panasonic PV-VS4821-K - Page 34

Panasonic PV-VS4821-K
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
Index Search
Press
SEARCH/ M/A SKIP*
to display SEARCH
in Stop or Play mode.
Press NUMBER
keys
to select recording
number.
To calculate number,
see below.
2
Note
Press FF or REW
to start search.
If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
1
3
Tape Operation (continued)
Search System
For each recording, an invisible index mark is placed on the tape.
A program index and information is also included for timer recordings.
These marks are used to access or scan recordings.
Press SEARCH/ M/A SKIP
twice to display SEARCH
in Stop or Play mode.
1
Program End Search
Press FF
to start
PROGRAM
END SEARCH.
2
Fig. 1
Fig. 2
Fig. 3
Notes
Locates end point of recording for continuity.
Examples of Program End Search.
If search exceeds
a few seconds in
BLANK area.
-->search continues 7 sec. past end point,
-->tape rewinds to 10 sec. before end point,
-->tape plays to end point and stops.
Upon locating end point,
If Program End Search is started very close to
an index mark, that mark may be skipped over.
To cancel, press PLAY or STOP.
SEARCH
INDEX PROG. END MOVIE
SEARCH
START :FF
NEXT :SEARCH M/A SK
I
P
EXIT
:STOP
Program 2 or BLANK
Program 1
the current tape position
Press SEARCH button
FF
INDEX
End Point
Program 2
Program 1
the current tape position
Press SEARCH button
INDEX
INDEX
BLANK
BLANK
FF
End Point
Program 2
Program 1
the current tape position
Press SEARCH button
BLANK
INDEX
FF
End Point
SEARCH
INDEX PROG. END MOVIE
ENTER INDEX NUMBER :1
USING
1
-
9 KEYS
FORWARD SEARCH :FF
REVERSE
SEARCH :REW
NEXT :SEARCH M/A SK
I
P
EXIT
:STOP
INDEX SEARCH 3
INDEX SEARCH
FORWARD SEARCH : FF
REVERSE
SEARCH : REW
Play begins at
end of search. To
search forward or
back 1 index,
press FF or REW
while screen left
is displayed
(10 sec.).
To Calculate Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
NOTE: indicates start points of each recording.
61572 34
17534 62

Related product manuals