Panasonic Ramsa WR-S4412 - Technical Specifications

TECHNICAL SPECIFICATIONS
Standard
Frequency Response
+1/—2.5dB at 20Hz~20kHz
T.H. D.
Equivalent Input Noise < —126dB at 1502 Input Source Impedance
94 +2/—2dB at 1kHz
< 01% at 20Hz to 20kHz
Maximum Voltage Gain
——
Measurement Condition
Input "A” to Group Out, +4dB IN, +4dB OUT,
RL=6002, Norminal Setting
Input "A” to Group Out, +4dB IN, +4dB OUT,
RL=6002, Norminal Setting
Audio Band Pass Filter W. T. D.
Mono IN "A” to Group Out
Mono input °A’” to Group to Master Out RL=10kQ
< —70dB at 1kHz Adjacent Input Channels &
CH SW & Fader
Crosstalk
Input A” to Group Out, +4dB IN, +4dB OUT,
RL=10kQ, Norminal Setting
C.MRR. < —80dB at 1kHz
Mono Input Equalizer
Low Fixed shelving type: 70Hz, +15 +3dB
Mid. Sweepable peaking type: 200Hz to 6.3kHz,
215 +3dB
High Fixed shelving type: 12.5kHz, +15 +3dB
(High/Low by Frequency Regulation of Shelving
+412 +2.5dB)
+24dB
+2/—OdB (Group/Master Out Balanced) at 1kHz
+20dB
+2/—O0dB (Aux/Monitor Out Unbalanced) at 1kHz
Maximum Output Level
Residual Output Noise |< —90dB by Group, Aux, Master, Monitor Output
100mm Stroke High Precision Cabon Fader
VU Response 12 Segment 3 Coler
LED Bar-graph Meter
Maximum Input Level Input A +22dB +3/—0dB Trim at CCW
Input B +28dB +3/—0dB
Input "A” to Group Out, Trim at ”"—60dB”
Input "A” to Group Out, +4dB IN, +4dB OUT,
RL=10kQ, Norminal Setting
Each EQ gain "PEAK" or "DIP”
Input ’A”, OUT FADER "MAX", +4dB in +14dB out
Setting
RL=6002 (GROUP, MASTER, AUX), RL=10kQ,
(MONITOR)
Output Faders & Level Control at "KILL’,
RL=6002 (EX, 10k : Monitor)
Audio Band Pass Filter W. T. D.
WR-S4412/B, WR-S4416/B, WR-S4424/B:
240V AC, 50/60Hz
WR-S4412/G, WR-S4416/G, WR-S4424/G:
230V AC, 50/60Hz
Power Supply
Power Consumption
WR-S4412
WR-S4416
WR-S4424
55W
60W
7OW
Dimensions (W x H x D)
WR-S4412
WR-S4416
WR-S4424
12ch
16ch
650mm x 171mm x 584mm
766mm x 171mm x 584mm
998mm x 171mm xX 584mm
Net Weight
WR-S4412 12ch 18.5kg
WR-S4416 16ch 21.0kg
WR-S4424 24ch =. 27.5kg
-i7-.
* OdB=0.775 vrms