Panasonic RQ-A200 - Page 8

ITEM INPUT MEASUREMENT
POINT
ADJUSTMENT
POINT
PROCEDURE
(A) Azimuth QZZCFM (8kHz,-
20dB)
Headphones
Jack (50 )
(Fig.3)
Azimuth
adjustment
screw (Refer to
Fig.2)
Adjust the azimuth
adjustment
screw during repeated
forward
and reverse playback to
obtain
maximum head azimuth
alignment
with both channels equal.
Then
screw-lock the
adjustment
place.
(B) Tape speed QZZCWAT
(3kHz,-10dB)
“ VR2 (Refer to
Fig.1)
Playback the central part
of
tape and adjust VR2 so
that
tape speed is as follows.
3000
60Hz (forward & Reverse)
3. PACKAGING
4. SCHEMATIC DIAGRAM NOTES
5. SCHEMATIC DIAGRAM
6. CIRCUIT BOARD AND WIRING CONNECTION
DIAGRAM
8