Panasonic RX-C36L

Covers power requirements, output, speaker, input/output, dimensions, and weight.

Details radio frequency range, sensitivity, and tape deck performance.

Identifies all buttons, knobs, and displays on the front panel.

Details rear/side inputs, outputs, and other controls.

Outlines initial steps for taking the unit apart.

Provides a table for removing specific components.

Continues the guide for removing specific components.

Details how to fix common issues and perform zero point tuning.

Presents the detailed schematic of the main electronic circuit.

Illustrates component placement on the main circuit board.

Shows the layout for the LED circuit board.

Shows how major boards and components connect.

Provides visual references for ICs, transistors, and diodes.

Explains the numbering conventions for resistors and capacitors.

Lists specific part numbers for capacitors and resistors.

Lists part numbers for integrated circuits, transistors, and other components.

Provides preparatory steps and notes before performing alignments.

Details steps for tuning MW, SW, and FM radio bands.

Covers Separation and Tape adjustments.

Visual guide showing test points for alignment.

Shows example waveforms and spring positions.

Diagram showing the physical arrangement of mechanical parts.

Details mechanism performance specs like tension, torque, and flutter.

Lists specific part numbers for mechanical components.

Provides details on specific parts like buttons, screws, and springs.

High-level functional overview of the system's signal flow.

Explains the function of various system switches (S1-S6).

Identifies external cabinet parts and their placement.

Lists accessories, packing materials, and related parts.